Re: SPARCstation 5 - where to start?

[Dmytro Kovalov <dmytro.kovalov@example.com>]

On Tue, 2001 Jun 5 Scott Stone wrote:

-> is the 110 a Sun CPU or is it a Ross CPU?  I heard that Linux/BSD has
-> trouble running on sun4m boxes with Ross CPUs, but that was just one
-> person saying that, I haven't researched it on my own.  I'm sure
-> others on this list (Chris? :) ) would know the answer more
-> definitively. 


No problem at all. I'm happily running redhat 5.0 (though I'm not sure 
at the moment how much of original RH has left on the box by now) on 
SS20 with Ross chip. Never had any problems.

--dmytro
-> -----------------------------------------------------
-> Scott M. Stone <sstone@example.com>
-> Senior Technical Consultant - UNIX and Networking
-> Taos, the Sysadmin Company - Santa Clara, CA
-> 
-> 
-> -----Original Message-----
-> From: Tod McQuillin [mailto:devin@example.com]
-> Sent: Tuesday, June 05, 2001 1:37 AM
-> To: tlug@example.com
-> Subject: Re: SPARCstation 5 - where to start?
-> 
-> 
-> On Tue, 5 Jun 2001 gavin.walker@example.com wrote:
-> 
-> > Basically it came fully unloaded ;o) Someone had removed the graphics
-> > card, memory, CDROM and hard disks. A quick trip to Akihabara yielded
-> > an 8 bit frame buffer, and I managed to get a couple of hard disks for
-> > it from a friendly Unix sysadmin. The memory is on its way from a
-> > friend of a friend, so now it's a CDROM I'm lacking. Any ideas? Must
-> > be cheap!
-> 
-> You should be able to use any internal or external SCSI CDROM drive.
-> However, a CDROM isn't strictly necessary as you should be able to install
-> over the network.
-> 
-> > So, I haven't actually switched the thing on yet. Are there any
-> > diagnostics I can run to see if the hardware's OK?
-> 
-> I'm not intimately familiar with the SS5 open boot prom (OBP) but yes, you
-> should be able to turn it on and navigate the OBP from the 'ok' prompt.
-> If you don't have a keyboard the system will use the first serial port at
-> 9600,N,1.
-> 
-> At the ok prompt you can see the current variable settings with
-> 'printenv'.  To run diagnostics, set the 'diag-switch?' variable to true,
-> like:  setenv diag-switch? true
-> 
-> After that use reset-all and watch the power-on self test.
-> 
-> > Although one of the disks currently has Solaris installed, I've been
-> > told it won't boot off it, only off an external device. Whatever, I
-> > want to put Linux on it anyway as it seems to be the more sensible
-> > option. If I manage to sort out a CDROM, what do I do next? Can I burn
-> > a copy of SPARC Linux onto a CD on my PC?
-> 
-> Sure, if you're installing from CDROM.  Or you can copy the distribution
-> to your PC, set up an NFS server or FTP server and install over the
-> network.  (You must first boot the sparc from floppy disk, or set up a
-> tftp server and boot over the network.)
-> 
-> The exact steps to follow will be different depending on which
-> distribution you choose, but there should be detailed instructions
-> available.  You might also consider installing NetBSD or OpenBSD (but
-> don't tell TLUG if you do this :) )
-> -- 
-> Tod McQuillin
-> 
-> 
-> -----------------------------------------------------------------------
-> Next Nomikai Meeting:    Fri, June (TBA) 19:30- Tengu Tokyo Eki Mae
-> Next Technical Meeting:  Sat, July (TBA) 13:30- 
-> -----------------------------------------------------------------------
-> more info: http://www.tlug.gr.jp           Sponsor: Global Online Japan
-> 
-> -----------------------------------------------------------------------
-> Next Nomikai Meeting:    Fri, June 15 19:30-  Tengu Tokyo Eki-Mae
-> Next Technical Meeting:  Sat, July 14 13:30- 
-> -----------------------------------------------------------------------
-> more info: http://www.tlug.gr.jp           Sponsor: Global Online Japan
->