Re: CD-RW Driver/dmesg

[Ahmed Sarwar <leyton@example.com>]

Jonathan Q wrote:

> Liton (leyton@example.com) wrote:
>
> > I wanted to send "dmesg". But I don't know how to do that.
>
> dmesg >dmesg.txt

Thanks.

>
>
> Then insert the file dmesg.txt in an email.
>
> Jonathana
> --
> There is Bag of Modul in the router
>
Linux version 2.4.2-2 (root@example.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001
BIOS-provided physical RAM map:
 BIOS-e820: 000000000009f800 @ 0000000000000000 (usable)
 BIOS-e820: 0000000000000800 @ 000000000009f800 (reserved)
 BIOS-e820: 0000000000017c00 @ 00000000000e8400 (reserved)
 BIOS-e820: 0000000007ef0000 @ 0000000000100000 (usable)
 BIOS-e820: 000000000000f800 @ 0000000007ff0000 (ACPI data)
 BIOS-e820: 0000000000000800 @ 0000000007fff800 (ACPI NVS)
 BIOS-e820: 0000000000080000 @ 00000000fff80000 (reserved)
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone DMA has max 32 cached pages.
zone(1): 28656 pages.
zone Normal has max 223 cached pages.
zone(2): 0 pages.
zone HighMem has max 1 cached pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=305 BOOT_FILE=/boot/vmlinuz-2.4.2-2 hde=ide-scsi
ide_setup: hde=ide-scsi
Initializing CPU#0
Detected 645.217 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1287.78 BogoMIPS
Memory: 126412k/131008k available (1365k kernel code, 4208k reserved, 92k data, 236k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
VFS: Diskquotas version dquot_6.5.0 initialized
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch (rgooch@example.com)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
  got res[10000000:10000fff] for resource 0 of Ricoh Co Ltd RL5c475
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 83866kB/27955kB, 256 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfcb0-0xfcb7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfcb8-0xfcbf, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK1214GAP, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 23579136 sectors (12073 MB), CHS=1467/255/63, UDMA(33)
Partition check:
 hda: hda1 hda2 hda3 < hda5 hda6 >
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 8250
Real Time Clock Driver v1.10d
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 236k freed
Adding Swap: 265032k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 8
0x378: readIntrThreshold is 8
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x14 cfgB=0x4b
0x378: ECP settings irq=7 dma=3
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(28)
parport0: assign_addrs: aa5500ff(28)
parport0: cpp_daisy: aa5500ff(28)
parport0: assign_addrs: aa5500ff(28)
ip_conntrack (1023 buckets, 8184 max)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@example.com> and others
PCI: Found IRQ 9 for device 00:0b.0
eth0: OEM i82557/i82558 10/100 Ethernet, 08:00:46:07:88:1E, I/O at 0xfcc0, IRQ 9.
  Receiver lock-up bug exists -- enabling work-around.
  Board assembly 100001-001, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
  Receiver lock-up workaround activated.
eth0: 0 multicast blocks dropped.
eth0: 0 multicast blocks dropped.
eth0: 0 multicast blocks dropped.
Linux PCMCIA Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Assigned IRQ 9 for device 00:0c.0
PCI: The same IRQ used for device 00:0a.0
Yenta IRQ list 0cb8, PCI irq9
Socket status: 30000419
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x220-0x22f 0x330-0x337 0x370-0x37f 0x388-0x38f 0x398-0x39f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
hde: UJDA330, ATAPI CD/DVD-ROM drive
ide2 at 0x180-0x187,0x386 on irq 3
ide_cs: hde: Vcc = 5.0, Vpp = 0.0
hde: bad special flag: 0x03
PPP generic driver version 2.4.1
NET4: Linux IPX 0.46 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.
NET4: AppleTalk 0.18a for Linux NET4.0
PCI: Enabling device 00:09.0 (0006 -> 0007)
PCI: Assigned IRQ 9 for device 00:09.0
ymfpci: YMF744 at 0xfecf0000 IRQ 9
ac97_codec: AC97 Audio codec, id: 0x414b:0x4d02 (Asahi Kasei AK4543)
hde: driver not present
hde: driver not present
hde: driver not present