Mailing List Archive
tlug.jp Mailing List tlug archive tlug Mailing List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]Re: [tlug] WAN fail-over configuration in Linux-based router
- Date: Thu, 5 Nov 2009 15:07:22 +0100
- From: Attila Kinali <attila@example.com>
- Subject: Re: [tlug] WAN fail-over configuration in Linux-based router
- References: <1a4744f80911050525g55066627ga0fe428222da8ce5@example.com>
- Organization: NERV
On Thu, 5 Nov 2009 22:25:15 +0900 Jianshi Huang <jianshi.huang@example.com> wrote: > Could somebody tell me what's the best way to achieve WAN fail-over > (backup) in a Linux-based router, e.g. openwrt or Vyatta open > networking. > > Since full fail-over also needs support from ISP side. Any established > connection can allowed to be dropped if one line drops. New > connections would be routed to the backup line. If you want true, real fail over, you need more than one ISP. I'll outline here what you approximately need. But please be aware that i'm not an expert in this field. You will need multiple, independent connections to your location. Independent means here, that each connection goes to a different ISP, with different upstream providers (this is important, as a lot of smaller ISP will happily sell you connectivity, but wont tell you that they are nothing more than a reseller of a bigger ISP, and hence you'll have introduced this upstream ISP as single point of failure). Because you'll need to be reachable from different ISPs over different routes, you'll need an AS (autonomus system) number and a PI (provider independent) IP block. Both are not easy to get, ie you have to have good arguments why you need an AS and a PI-block, what you want to do with them and why it doesnt work otherwise (the reason is because the AS space is nearly exhausted and those who manage border gateways do not like small IP ranges in their routing table, with small equals anything smaller than a /19). Now that you have the connectivity, you need two routers that can talk BGP so that you can announce that you are up and online and where you can be reached from. It has to be two routers, because you want here redundancy too. Of course, if you just need a backup internet connection in case your ADSL line drops, that's a completely different matter ;-) HTH Attila Kinali -- If you want to walk fast, walk alone. If you want to walk far, walk together. -- African proverb
- Follow-Ups:
- Re: [tlug] WAN fail-over configuration in Linux-based router
- From: Curt Sampson
- References:
- [tlug] WAN fail-over configuration in Linux-based router
- From: Jianshi Huang
Home | Main Index | Thread Index
- Prev by Date: Re: [tlug] WAN fail-over configuration in Linux-based router
- Next by Date: Re: [tlug] WAN fail-over configuration in Linux-based router
- Previous by thread: Re: [tlug] WAN fail-over configuration in Linux-based router
- Next by thread: Re: [tlug] WAN fail-over configuration in Linux-based router
- Index(es):
Home Page Mailing List Linux and Japan TLUG Members Links