Mailing List ArchiveSupport open source code!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]tlug: Need the password for the ipc loaded with linux. Please
- To: tlug@example.com, gaijin@example.com
- Subject: tlug: Need the password for the ipc loaded with linux. Please
- From: "fernando@example.com" <fernando@example.com>
- Date: Sun, 04 Jan 1998 22:28:00 +0900
- Content-Transfer-Encoding: 7bit
- Content-Type: text/plain; charset=us-ascii
- Organization: fernando@example.com
- References: <199712270502.OAA03516@example.com>
- Reply-To: tlug@example.com
- Sender: owner-tlug@example.com
Finally i got the serial terminal in TTYA so I can get a login prompt but Tried to login as root and dont know root password ..!!!! Please reply with the password. oshiete kudasai for your info....... is the IPC sun sparc loaded with red hat linux---raffled out last TLUG meeting--- after login it i will proceed to use setserial to deliver the output to the console screen. I already used setenv output screen setenv input keyboard in the ok PROMPT I have a sun keyboard and also I have a sun monitor so I want to use them as default output devices...... so the IPC is not problem...is just to tell linux to send the output to the right devices..... --------just other thing what would be the setserial command??? to do this ??? John Little wrote: > Fernando, > > Let's take these two issues separately... > > % > % unable to boot up ipc sun with red hat linux > % booting stops at loading appletalk protocol > % > > You IPC *is* booting up, but as I told you at the meeting, it is > booting in "serial console" mode. That is, the login prompt is coming > up on serial port "A". Now, you can either attach a serial cable > to the port and use the "setserial" command to change the console > device back to the video/keyboard ports, or... > > % > % tried to boot up with red hat linux boot up disk..returns to red hat > % setup screen. > % > > ...use the virtual console available from the second-stage install > step of Red Hat install ( <ALT> <F2> ) to get you to a shell prompt > where you can mount the disk partitions and then use "setserial". > > I would recommend that you use the first method, as it is by far the > simplest. Please see my previous posting to the list on the pin-out > connections for the IPC serial port. > > Good luck! - If all else fails, bring it in to the next meeting > and we'll dissect it on the table. :-) > > -John- > > --------------------------------------------------------------- > Next TLUG Nomikai: 14 January 1998 19:15 Tokyo station > Yaesu Chuo ticket gate. Or go directly to Tengu TokyoEkiMae 19:30 > Chuo-ku, Kyobashi 1-1-6, EchiZenYa Bld. B1/B2 03-3275-3691 > Next Saturday Meeting: 14 February 1998 12:30 Tokyo Station > Yaesu Chuo ticket gate. > --------------------------------------------------------------- > a word from the sponsor: > TWICS - Japan's First Public-Access Internet System > www.twics.com info@example.com Tel:03-3351-5977 Fax:03-3353-6096 --------------------------------------------------------------- Next TLUG Nomikai: 14 January 1998 19:15 Tokyo station Yaesu Chuo ticket gate. Or go directly to Tengu TokyoEkiMae 19:30 Chuo-ku, Kyobashi 1-1-6, EchiZenYa Bld. B1/B2 03-3275-3691 Next Saturday Meeting: 14 February 1998 12:30 Tokyo Station Yaesu Chuo ticket gate. --------------------------------------------------------------- a word from the sponsor: TWICS - Japan's First Public-Access Internet System www.twics.com info@example.com Tel:03-3351-5977 Fax:03-3353-6096
Home | Main Index | Thread Index
- Prev by Date: tlug: unanswered questions
- Next by Date: tlug: Christmas on Valentines Day
- Prev by thread: tlug: unanswered questions
- Next by thread: tlug: Christmas on Valentines Day
- Index(es):
Home Page Mailing List Linux and Japan TLUG Members Links